IC-M402

The IC-M402 incorporates the latest in user-convenient digital technology, is incredibly easy to see and operate, and is rated JIS-7 submersible. A large, newly designed LCD and speaker make the IC-M402 easy to see and hear, even in rough marine conditions.

"Bottom Line: The Icom IC-M402 is a well-built, top-performing radio at a fair price. We recommend it highly." - Practical Sailor and Powerboat Reports, 8.01

Features

• Large 2-digit channel number with scrolling channel names
  
  Look at the size of the LCD with large letters and numbers! The large, easy to see display has 27 x 43 mm (1 1/16 x 1 5/8 in.) dimensions, so channel indications are maximized. 10-character channel names and all settings are displayed at the same time.
  
  
• Easy to hear speaker
  
  A newly designed large speaker grill improves the output of the front mounted speaker. The result is that the audio sounds even louder than the 4.5 (typical) output capability, even over wind or engine noise.
  
  
• Built-in DSC capability
  
  The DSC watch function monitors Ch 70, while receiving another channel. It allows you to send a formatted distress message in an emergency. The position request function indicates a caller's position. Up to 30 DSC IDs are memorized.
  
  
• Rugged waterproof construction, three year warranty
  
  By spraying off any salt with fresh water after your outing, the IC-M402 is designed to work for many years.
  (Equivalent to JIS-7, submersible in up to 1 meter of water for up to 30 minutes; except cables.)

Specifications

General

• Frequency range:
  • Tx: 156.025 - 157.425 MHz
  • Rx: 156.050 - 163.275 MHz
• Mode:
  • 16K0G3E (FM)
  • 16K0G2B (DSC)
• Usable channels: All international, USA* and Canadian* channels, plus 10 Weather channels.*
  (* USA version only)
• Power supply requirement: 13.8 V DC ±15%
• Current drain (at 13.8 V DC):
  • Transmit: 6 A (at 25 W output)
  • Receive: 1.2 A (at max. audio)
• Operating temp. range: -20°C to +60°C; -4°F to +140°F
• Antenna connector: SO-239 (50 ohm)
• Dimensions (projections not included):
  • 153(W) x 67(H) x 141.6(D) mm
  • 6 1/32(W) x 2 5/8(H) x 5 9/16(D) in.
• Weight: 900 g; 2 lb

Transmitter

• Output power: 25 W or 1 W (at 13.8 V DC)
• Modulation system: Variable reactance freq. modulation
• Spurious emissions: Less than -70 dB
• Adjacent channel power: 70 dB

Receiver

• Receive system: Double conversion super-heterodyne
• Intermediate frequencies:
  • 1st 21.7 MHz
  • 2nd 450 kHz
• Sensitivity: 0.25 µV (at 12 dB SINAD)
• Squelch sensitivity: 0.2 µV typical
• Adjacent channel selectivity: 70 dB
• Spurious response rejection ratio: 70 dB
• Intermodulation rejection ratio: 70 dB
• Audio output power: 4.5 W typical (at 10% distortion with a 4 ohm load)
• Audio output impedance: 4 ohms

Supplied Accessories

• Hand microphone
• Spare fuses
• DC power cable
• Mounting bracket kit
• Owner's manual

Options

• MB-69 FLUSH MOUNT KIT: For flush mounting the IC-M402 to a flat surface such as an instrument control panel.
• HM-129B/W REMOTE FUNCTION MIC: White and black are available. Same as supplied.
• OPC-999 EXTENSION CABLE FOR HM-127B/W COMMANDMIC^®: 6 m (20 ft) of extension cable for the COMMANDMIC^®.
• COMMANDMIC^® (HM-127) REMOTE-CONTROL MICROPHONE: With slim dimensions, the HM-127 fits in your palm comfortably and with the sizable LCD, allows you to control all functions of the main unit (except DSC operation). You can talk with the main unit as an intercom. 6 m of extension cable is attached to the unit. Equivalent to JIS grade 7 waterproof construction. Black or white versions available.
  • Size: 59.9(W) x 121.4(H) x 30.0(D) mm
    2 11/32(W) x 4 25/32(H) x 1 3/16(D0 in.
  • Weight (approx.): 160 g ; 5.64 oz

Download

Icom IC-M402 Brochure